WHAT IS THE LUMATEK ZEUS 600W PRO 2.9 LED GROW LIGHT?
The Lumatek Zeus 600W Pro 2.9 LED provide you with 6x magnetic bars of efficient, low powered LED light. Its design utilizes high quality Lumatek drivers with the latest generation of top bin LEDs from Lumileds and Osram. The LEDs are housed in bars that are cleverly fixed in place using magnets.
FLEXIBLE INSTALL OPTIONS
For even greater flexibility, you can either mount the LED driver to the unit or use it remotely. If you use it remotely, you’ll need to use a 5-metre power extension cable, available separately.
FULL SPECTRUM LIGHT
Lumatek Zeus 600w pro provide a full-spectrum light – this makes them the only source of light you’ll need for veg (using the included dimmer) and flowering cycles:
Lumatek Zeus 600w pro LED unit offers a PPF of up to 1770 µmol/s and an efficacy of up to 2.9 µmol/J.
MATCH THE RECOMMENDED PPFD TO THE STAGE OF GROWTH FOR YOUR PLANT
The following table covers the recommended PPFD (µmol/m2/s) for a fast growing, light sensitive annual plant:
CLEAR GLUE PROTECTION TECHNOLOGY FOR MORE LIGHT AND SIMPLE MAINTENANCE
Clear Glue protection technology results in 99% of total the photons produced being transmitted without light loss. The high level of protection offered extends the lifetime of diodes by providing corrosion resistance and IP65 waterproof protection. Maintenance is basic – you’ll simply clean the bars with a damp cloth.
SINGLE LIGHT SOURCE THROUGHOUT THE LIFECYCLE OF YOUR PLANTS
The Zeus 600W range are dimmable without losing efficiency. This means it’s the only light fixture you’ll need throughout the lifecycle of your plants. The use of six bars of high efficiency, low powered LEDs reduces the temperature of the LEDs. This works to allow an increased light output with improved light maintenance.
Garden tip: The 100W LED bars are simple to replace if new, compatible bars become available in the future. This also makes replacing bars really easy.
SUITED TO ANY GROW SYSTEM
The Lumatek Zeus 600W array creates a uniform spread of light at a short distance to the crop canopy. This enables it to be a single source grow lighting in:
- Multi-layer cultivation systems
- Single benches in low rooms
- Grow tents
WHAT IS THE FOOTPRINT FOR THE LUMATEK ZEUS 600W LED LIGHT?
This fixture is perfect for covering from a 1.2 × 1.2m area to a 1.5 × 1.5m area.
Lumatek LED Fixtures are fully controllable with either the Lumatek Digital Panel Plus 2.0 or with any other Control System that utilises 0-10V output signal. You can still control Lumatek LEDs if your Universal Controller has an “RJ” port interface. Simply convert the signal using an RJ to 0-10V control adaptor.
|Lumatek Zeus 600W Pro 2.9 LED
|up to 2.9 µmol/J
|220-240V @ 50-60Hz
|2.8 A (3.2 A max.)
|1.4 x 1.4 m
|0º – 40ºC
|20% – 90%
|+60 000 hrs
|Higher Spec Osram and Lumileds Diodes
|With Lumatek Digital Panel Plus 2.0
(W x L x D)
|1091 x 1182.4 x 51.9* mm
(With Driver Attached)
|2201 BTU/h (Max)
(With Driver Remote)
|2047 BTUs/h (Max)
|3-Pin UK Plug